POWER BACK DOOR SYSTEM


  1. OUTLINE


    1. The power back door system enables the back door to be opened and closed automatically by a motor in accordance with signals from the power back door switch, the back door opener switch assembly or power back door button on an electrical key transmitter sub-assembly. In addition, a back door control switch has been provided on the back door for convenience.

    2. A spindle type power back door is used to achieve improved rearward visibility. Also, the user can set the opening angle of the back door in the preferences. For example, if the garage has a low ceiling, the opening angle of the back door can be set not to hit the ceiling.

    3. This system is controlled by the power back door ECU (multiplex network door ECU).

  2. PRECAUTION


    1. Door Control Receiver Expressions


      1. The type of door control receiver used on this model differs according to the specifications of the vehicles. The expressions listed in the table below are used in this section:

        Vehicle Specification Part Name in Manual Actual Part Name
        Models with Tire Pressure Warning System Smart Door Control Receiver Assembly Electrical and TPMS Receiver Assembly
        Models without Tire Pressure Warning System Smart Door Control Receiver Assembly Smart Door Control Receiver Assembly