| Ignition timing | 3 to 7° BTDC at idle | |
| Idle speed | 650 to 750 rpm | |
| CO/HC | Idle CO concentration | 0 to 0.5 % |
| Idle HC concentration | Applicable local regulation | |
| Compression | Compression pressure | 1,230 kPa (12.5 kgf*cm2, 178 psi) or more |
| Minimum pressure | 880 kPa (9.0 kgf*cm2, 128 psi) |
|
| Difference between each cylinder | 68 kPa (0.7 kgf*cm2, 10 psi) |
|
| No. 1 camshaft | Maximum circle runout | 0.03 mm (0.0012 in.) |
| Standard cam robe height | 42.712 to 42.812 mm (1.6816 to 1.6885 in.) | |
| Minimum cam robe height | 42.712 mm (1.6816 in.) | |
| No. 1 journal diameter | 35.949 to 35.965 mm (1.4153 to 1.4159 in.) | |
| Other journal diameter | 26.959 to 26.975 mm (1.0614 to 1.0620 in.) | |
| Standard thrust clearance | 0.10 to 0.24 mm (0.004 to 0.009 in.) | |
| Maximum thrust clearance | 0.26 mm (0.010 in.) | |
| Standard oil clearance : No. 1 journal |
0.035 to 0.072 mm (0.0014 to 0.0029 in.) | |
| Standard oil clearance : Other journal |
0.025 to 0.062 mm (0.0010 to 0.0028 in.) | |
| Maximum oil clearance | 0.08 mm (0.0031 in.) | |
| No. 2 camshaft | Maximum circle runout | 0.03 mm (0.0012 in.) |
| Standard cam robe height | 42.540 to 42.640 mm (1.648 to 1.6787 in.) | |
| Minimum cam robe height | 42.540 mm (1.6748 in.) | |
| No. 1 journal diameter | 35.949 to 35.965 mm (1.4153 to 1.4159 in.) | |
| Other journal diameter | 26.959 to 26.975 mm (1.0614 to 1.0620 in.) | |
| Standard thrust clearance | 0.10 to 0.24 mm (0.004 to 0.009 in.) | |
| Maximum thrust clearance | 0.26 mm (0.010 in.) | |
| Standard oil clearance : No. 1 journal |
0.035 to 0.072 mm (0.0014 to 0.0029 in.) | |
| Standard oil clearance : Other journal |
0.025 to 0.062 mm (0.0010 to 0.0028 in.) | |
| Maximum oil clearance | 0.08 mm (0.0031 in.) | |
| Chain | Maximum chain elongation | 147.5 mm (5.807 in.) |
| Camshaft timing sprocket | Minimum distance | 1.0 mm (0.039 in.) |
| Minimum sprocket diameter (with chain) | 113.8 mm (4.480 in.) | |
| Camshaft timing gear | Minimum distance | 1.0 mm (0.039 in.) |
| Minimum sprocket diameter (with chain) | 113.8 mm (4.480 in.) | |
| Crankshaft timing sprocket | Minimum distance | 1.0 mm (0.039 in.) |
| Minimum sprocket diameter (with chain) | 59.4 mm (2.358 in.) | |
| Chain tensioner slipper | Maximum wear | 2.0 mm (0.079 in.) |
| Chain vibration damper | Maximum wear | 2.0 mm (0.079 in.) |
| Timing chain guide | Maximum wear | 0.5 mm (0.020 in.) |
| Cylinder head set bolt | Standard outside diameter | 10.76 to 10.97 mm (0.4236 to 0.4319 in.) |
| Minimum outside diameter | 10.40 mm (0.4094 in.) | |
| Cylinder head | Maximum warpage | 0.05 mm (0.0020 in.) |
| Inner compression spring | Free length | 52.13 mm (2.05 in.) |
| Maximum deviation | 1.3 mm (0.0512 in.) | |
| Maximum angle (reference) | 2° | |
| Intake valve | Standard overall length | 106.56 to 106.96 mm (4.1953 to 4.2110 in.) |
| Minimum overall length | 106.46 mm (4.1913 in.) | |
| Valve stem diameter | 5.470 to 5.485 mm (0.2154 to 0.2159 in.) | |
| Standard margin thickness | 1.05 to 1.45 mm (0.0413 to 0.0571 in.) | |
| Minimum margin thickness | 0.5 mm (0.0197 in.) | |
| Exhaust valve | Standard overall length | 107.04 to 107.44 mm (4.2220 to 4.2299 in.) |
| Minimum overall length | 106.94 mm (4.2102 in.) | |
| Valve stem diameter | 5.465 to 5.480 mm (0.2151 to 0.2157 in.) | |
| Standard margin thickness | 1.2 to 1.6 mm (0.0472 to 0.0630 in.) | |
| Minimum margin thickness | 0.5 mm (0.0197 in.) | |
| Intake valve guide bush | Bush inside diameter | 5.510 to 5.530 mm (0.2169 to 0.2177 in.) |
| Standard oil clearance | 0.025 to 0.060 mm (0.0010 to 0.0024 in.) | |
| Maximum oil clearance | 0.08 mm (0.0032 in.) | |
| Bush bore diameter | 10.285 to 10.306 mm (0.4049 to 0.4057 in.) | |
| Protrusion height | 9.8 to 10.2 mm (0.3858 to 0.4016 in.) | |
| Exhaust valve guide bush | Bush inside diameter | 5.510 to 5.530 mm (0.2169 to 0.2177 in.) |
| Standard oil clearance | 0.030 to 0.065 mm (0.0012 to 0.0026 in.) | |
| Maximum oil clearance | 0.10 mm (0.0039 in.) | |
| Bush bore diameter | 10.285 to 10.306 mm (0.4049 to 0.4057 in.) | |
| Protrusion height | 7.6 to 8.0 mm (0.2992 to 0.3150 in.) | |
| Connecting rod | Standard thrust clearance | 0.150 to 0.350 mm (0.006 to 0.014 in.) |
| Maximum thrust clearance | 0.4 mm (0.016 in.) | |
| Standard oil clearance | 0.039 to 0.066 mm (0.0015 to 0.0026 in.) | |
| Bearing center wall thickness : Mark 1 |
1.484 to 1.487 mm (0.0584 to 0.0585 in.) | |
| Bearing center wall thickness : Mark 2 |
1.488 to 1.490 mm (0.0586 to 0.0587 in.) | |
| Bearing center wall thickness : Mark 3 |
1.491 to 1.493 mm (0.0587 to 0.0588 in.) | |
| Maximum bend | 0.03 mm (0.0012 in.) per 100 mm (3.94 in.) | |
| Maximum twist | 0.15 mm (0.0059 in.) per 100 mm (3.94 in.) | |
| Bushing inside diameter : Mark A |
22.005 to 22.008 mm (0.86633 to 0.86645 in.) | |
| Bushing inside diameter : Mark B |
22.008 to 22.011 mm (0.86645 to 0.86657 in.) | |
| Bushing inside diameter : Mark C |
22.011 to 22.014 mm (0.86657 to 0.86669 in.) | |
| Standard oil clearance | 0.001 to 0.007 mm (0.00004 to 0.00028 in.) | |
| Maximum oil clearance | 0.010 mm (0.00039 in.) | |
| Crankshaft | Standard thrust clearance | 0.020 to 0.220 mm (0.0008 to 0.0087 in.) |
| Maximum thrust clearance | 0.30 mm (0.0118 in.) | |
| Thrust washer thickness | 2.440 to 2.490 mm (0.0961 to 0.0980 in.) | |
| Standard oil clearance : No. 3 journal |
0.030 to 0.055 mm (0.0012 to 0.0022 in.) | |
| Standard oil clearance : Other journal |
0.024 to 0.049 mm (0.0009 to 0.0019 in.) | |
| Maximum clearance | 0.10 mm (0.0039 in.) | |
| Maximum circle runout | 0.03 mm (0.0012 in.) | |
| No. 3 journal diameter | 59.981to 59.994 mm (2.3615 to 2.3620 in.) | |
| Except No. 3 journal diameter | 59.987to 60.000 mm (2.3229 to 2.3622 in.) | |
| Maximum taper and out-of-round (Main journal) | 0.005 mm (0.0002 in.) | |
| Crank pin diameter | 52.989 to 53.002 mm (2.0862 to 2.0867 in.) | |
| Maximum taper and out-of-round (Crank pin) | 0.003 mm (0.0001 in.) | |
| Crankshaft bearing cap bolt | Standard outside diameter | 10.76 to 10.97 mm (0.4236 to 0.4319 in.) |
| Minimum outside diameter | 10.66 mm (0.4197 in.) | |
| Cylinder block | Maximum warpage | 0.05 mm (0.0020 in.) |
| Standard diameter | 85.990 to 86.003 mm (3.3854 to 3.3859 in.) | |
| Piston diameter : Standard |
85.951 to 85.986 mm (3.3839 to 3.3853 in.) | |
| Piston diameter : O/S 0.50 |
86.431 to 86.486 mm (3.4028 to 3.4050 in.) | |
| Standard oil clearance | 0.004 to 0.052 mm (0.0002 to 0.0020 in.) | |
| Maximum oil clearance | 0.10 mm (0.0039 in.) | |
| Piston pin | Piston pin diameter : A |
21.997 to 22.000 mm (0.86602 to 0.86614 in.) |
| Piston pin diameter : B |
22.001 to 22.003 mm (0.86615 to 0.86626 in.) | |
| Piston pin diameter : C |
22.003 to 22.006 mm (0.86627 to 0.86638 in.) | |
| Piston ring | No. 1 Ring groove clearance | 0.020 to 0.075 mm (0.0008 to 0.0030 in.) |
| No. 2 Ring groove clearance | 0.020 to 0.065 mm (0.0008 to 0.0026 in.) | |
| Oil Ring groove clearance | 0.020 to 0.070 mm (0.0008 to 0.0028 in.) | |
| No. 1 Standard end gap | 0.220 to 0.340 mm (0.0087 to 0.0134 in.) | |
| No. 2 Standard end gap | 0.450 to 0.570 mm (0.0177 to 0.0224 in.) | |
| Oil (side rail) Standard end gap | 0.100 to 0.400 mm (0.0039 to 0.0157 in.) | |
| No. 1 Maximum end gap | 0.90 mm (0.0354 in.) | |
| No. 2 Maximum end gap | 1.36 mm (0.0535 in.) | |
| Oil (side rail) Maximum end gap | 0.75 mm (0.0295 in.) | |
| Connecting rod bolt | Standard diameter | 7.200 to 7.300 mm (0.283 to 0.287 in.) |
| Minimum diameter | 7.00 mm (0.276 in.) | |
| Connecting rod bearing | : Upper bearing (#1, 5 journal) Standard dimension |
3.75 mm (0.1476 in.) |
| : Upper bearing (#3 journal) Standard dimension |
1.75 mm (0.0685 in.) | |
| : Upper bearing (#2, 4 journal) Standard dimension |
2.75 mm (0.1083 in.) | |
| : Lower bearing (#1, 5 journal) Standard dimension |
3.75 mm (0.1476 in.) | |
| : Lower bearing (#3 journal) Standard dimension |
1.75 mm (0.0685 in.) | |
| : Lower bearing (#2, 4 journal) Standard dimension |
2.75 mm (0.1083 in.) | |