ROOF SUNSHADE SWITCH INSPECTION

PROCEDURE


  1. INSPECT ROOF SUNSHADE SWITCH (MAP LIGHT ASSEMBLY)


    1. A005D5PE01
      Text in Illustration
      *a

      Component without harness connected

      (Roof Sunshade Switch (Map Light Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      8 (CLS) - 15 (GND1) CLOSE switch is pressed Below 1 Ω
      8 (CLS) - 15 (GND1) CLOSE switch is not pressed 10 kΩ or higher
      9 (OPN) - 15 (GND1) OPEN switch is pressed Below 1 Ω
      9 (OPN) - 15 (GND1) OPEN switch is not pressed 10 kΩ or higher

      If the result is not as specified, the roof sunshade switch (map light assembly) may be malfunctioning.