DYNAMIC RADAR CRUISE CONTROL SYSTEM


  1. CONSTRUCTION


    1. Cruise Control Switch


      1. The operation switches of the dynamic radar cruise control system (cruise control switch, -SET switch, +RES switch, CANCEL switch and vehicle-to-vehicle distance control switch) are positioned in the steering pad switch assembly.

        B002358C01
        *1 Steering Pad Switch Assembly - -
        *a Vehicle-to-vehicle Distance Control Switch *b +RES Switch
        *c Cruise Control Switch *d CANCEL Switch
        *e -SET Switch - -

    2. Cruise Control Switch


      1. When the cruise control system is turned on using the main switch, the system starts in vehicle-to-vehicle distance control mode. When the main switch is pushed and held for 1.5 seconds or more from the cruise control system off, The system changes to constant control mode.

    3. Vehicle-to-vehicle Distance Control Switch


      1. While the vehicle is being driven in vehicle-to-vehicle distance control mode, the vehicle-to-vehicle distance setting can be changed as follows each time the distance control switch is pressed; long → middle → short → long.

      2. If the ignition switch is turned off and back ON, the system will default to "long".

      3. The vehicle-to-vehicle distance is as follows:

        Mode Vehicle-to-vehicle Distance*
        Long Approximately 50 m (160 ft.)
        Middle Approximately 40 m (130 ft.)
        Short Approximately 30 m (100 ft.)

        Tech Tips

        *: While driving at a speed of 80 km/h (50 mph).