AIRBAG CUT-OFF SWITCH INSPECTION

PROCEDURE

  1. INSPECT AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY

    1. C302028C01

      *a

      Component without harness connected

      (Airbag Cut Off Switch Cylinder Sub-assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      6 (PMC+) - 3 (PMC-)

      Cut off switch ON

      360 to 440 Ω

      6 (PMC+) - 3 (PMC-)

      Cut off switch OFF

      90 to 110 Ω

      If the result is not as specified, replace the airbag cut off switch cylinder sub-assembly.