OIL PAN INSTALLATION

PROCEDURE

1. INSTALL OIL CLEANER (CVT) MAGNET

   1. 

      *1	Oil Cleaner (CVT) Magnet

      Install the 2 oil cleaner (CVT) magnets to the transaxle oil (CVT) pan sub-assembly.

2. INSTALL TRANSAXLE OIL (CVT) PAN SUB-ASSEMBLY

   1. Clean the transaxle oil (CVT) pan sub-assembly installation surface of the continuously variable transaxle assembly.

   2. Install a new transaxle oil pan (CVT) gasket to the transaxle oil (CVT) pan sub-assembly.

   3. Install the transaxle oil (CVT) pan sub-assembly to the continuously variable transaxle assembly with the 19 bolts.

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

   4. Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

      1.7 N*m

      17 kgf*cm

      15 in.*lbf

   5. Using a 6 mm hexagon socket wrench, temporarily install the gasket and overflow plug to the transaxle oil (CVT) pan sub-assembly.

      Tip:

      Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.

   6. Using a 10 mm hexagon socket wrench, install a new gasket and drain plug to the transaxle oil (CVT) pan sub-assembly.

      49 N*m

      500 kgf*cm

      36 ft.*lbf

3. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

   Click hereClick here

4. INSPECT FOR FLUID LEAK

5. INSTALL REAR ENGINE UNDER COVER LH

   Click hereClick hereClick here

6. INSTALL NO. 1 ENGINE UNDER COVER

   Click hereClick hereClick here