ДАТЧИК ПОЛОЖЕНИЯ КОЛЕНЧАТОГО ВАЛА УСТАНОВКА

PROCEDURE


  1. INSTALL CRANKSHAFT POSITION SENSOR


    1. Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

    2. Install the crankshaft position sensor with the bolt to the timing gear cover.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
    3. Attach the 4 clamps and connect the crankshaft position sensor connector.

      Note

      Insert the crankshaft position sensor wire harness into the protrusions of the timing gear cover.

  2. INSTALL NO. 2 ENGINE UNDER COVER

    Click here

  3. INSTALL NO. 1 ENGINE UNDER COVER

    Click here