BATTERY CURRENT SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Tech Tips

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with the work Click here.

  2. REMOVE BATTERY CURRENT SENSOR ASSEMBLY


    1. A004IW6

      Disconnect the connector.

    2. A004JDWE01
      Text in Illustration
      *1 Engine Wire

      Remove the nut and disconnect the engine wire.

      Note

      Since this operation may damage the molding, make sure to fully open the driver and passenger side door windows.

    3. A004JBZ

      Loosen the nut and remove the battery current sensor assembly.