VALVE BODY ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE ATF TEMPERATURE SENSOR ASSEMBLY

    Click here

  2. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


    1. B008IP3

      Remove the 11 bolts and transmission valve body assembly from the automatic transaxle assembly.

      Note


      • When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and the transaxle case sub-assembly to interfere with each other.

      • Make sure the manual valve does not fall when removing the transmission valve body assembly, as the manual valve is not fixed to the transmission valve body assembly.

  3. REMOVE TRANSAXLE CASE GASKET


    1. B008JO2

      Remove the 2 transaxle case gaskets from the automatic transaxle assembly.

  4. REMOVE NO. 1 CHECK VALVE SUB-ASSEMBLY (w/ Stop And Start System)


    1. B008HBJ

      Remove the No. 1 check valve sub-assembly from the automatic transaxle assembly.

  5. REMOVE MANUAL VALVE


    1. B008I9U

      Remove the manual valve from the transmission valve body assembly.