OIL PAN REMOVAL

PROCEDURE

1. REMOVE NO. 1 ENGINE UNDER COVER

   Click here

2. REMOVE REAR ENGINE UNDER COVER LH

   Click here

3. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH

   Click here

4. REMOVE NO. 1 TRANSMISSION OIL FILLER TUBE

   1. 

      Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the continuously variable transaxle assembly.

   2. 

      *1	No. 1 Transmission Oil Filler Tube

      Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the oil pan and drain the continuously variable transaxle fluid.

5. REMOVE TRANSAXLE OIL PAN SUB-ASSEMBLY

   1. 

      Remove the 19 bolts and oil pan from the continuously variable transaxle assembly.

      Note:

      Some fluid will remain in the oil pan. To prevent the fluid from spilling, place a container under the oil pan, and then carefully remove all the pan bolts and oil pan assembly.

   2. Remove the gasket from the oil pan.

   3. 

      *1

      Magnet

      Remove the 3 magnets from the oil pan.

      Note:

      • Clean the oil pan and remove any metal particles, sludge, etc.

      • Clean off any metal particles that adhere to the magnets.