CLEARANCE SONAR MAIN SWITCH REMOVAL

PROCEDURE

1. PRECAUTION

   Note:

   After turning the ignition switch off, waiting time maybe required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

   Click hereClick hereClick hereClick hereClick here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick hereClick hereClick hereClick hereClick here

3. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

   Click hereClick here

4. REMOVE TELLTALE LIGHT ASSEMBLY (CLEARANCE SONAR MAIN SWITCH)

   1. 

      Detach the 2 clips and claw and remove the telltale light assembly (clearance sonar main switch).

   2. 

      Disconnect the connector.