REAR AIR CONDITIONING PANEL INSTALLATION

PROCEDURE


  1. INSTALL REAR POWER SEAT SWITCH


    1. B006BWM

      Attach the clamp and connect the connector.

  2. INSTALL REAR SEAT CENTER ARMREST COVER


    1. B006BAM

      Install the rear seat center armrest cover.

  3. INSTALL REAR SEAT CENTER ARMREST BRACKET LH


    1. B006EPV

      Install the rear seat center armrest bracket LH with the 2 screws.

  4. INSTALL REAR SEAT CENTER ARMREST BRACKET RH


    1. B006EWF

      Install the rear seat center armrest bracket RH with the 2 screws.

  5. INSTALL REAR POWER SEAT SWITCH WITH BRACKET


    1. B006B1G

      Install the rear power seat switch with bracket with the 4 screws.

  6. INSTALL NO. 2 REAR SEAT CENTER ARMREST PANEL


    1. B006ETCC01
      B006DHE Install in this Direction

      While moving the No. 2 rear seat center armrest panel in the direction indicated by the arrow shown in the illustration, insert the guide.

    2. Attach the clip and claw and install the No. 2 rear seat center armrest panel.

  7. INSTALL NO. 2 REAR SEAT CENTER ARMREST PANEL SUB-ASSEMBLY


    1. B0069OHC01
      B006DHE Install in this Direction

      While moving the No. 2 rear seat center armrest panel sub-assembly in the direction indicated by the arrow shown in the illustration, insert the guide.

    2. Attach the clip and claw and install the No. 2 rear seat center armrest panel sub-assembly.

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  10. CHECK SRS WARNING LIGHT

    Click here

  11. INSPECT REAR SEAT ASSEMBLY

    Click here

  12. INSPECT SEAT HEATER SYSTEM

    Click here

  13. INSPECT CLIMATE CONTROL SEAT SYSTEM

    Click here

  14. INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here