FUEL INJECTOR REMOVAL

PROCEDURE


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  5. REMOVE AIR CLEANER CAP AND HOSE

    Click here

  6. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  8. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    Click here

  9. REMOVE BATTERY

  10. REMOVE BATTERY TRAY

  11. DISCONNECT ENGINE WIRE

    Click here

  12. REMOVE WIRE HARNESS CLAMP BRACKET


    1. B008IJH

      Remove the 2 nuts and wire harness clamp bracket.

  13. DISCONNECT FUEL TUBE SUB-ASSEMBLY


    1. B008H84

      Remove the EFI fuel pipe clamp and disconnect the fuel tube sub-assembly.

      Click here

  14. REMOVE VACUUM SENSOR ASSEMBLY

    Click here

  15. REMOVE VACUUM SENSOR BRACKET

    Click here

  16. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY


    1. B008IHS

      Remove the bolt and disconnect the clamp from the cylinder head sub-assembly.

    2. B008HFW

      Remove the 2 bolts and fuel delivery pipe sub-assembly.

      Note

      Be careful not to drop the fuel injector assemblies when removing the fuel delivery pipe sub-assembly.

    3. B008JJ9

      Remove the 2 No. 1 delivery pipe spacers.

  17. REMOVE FUEL INJECTOR ASSEMBLY


    1. B008ITR

      Pull the 4 fuel injector assemblies out of the fuel delivery pipe sub-assembly.

    2. Remove the O-ring from the fuel injector assembly.

    3. B008IQW

      For reinstallation, attach a tag or label to the injector shaft.

      Note

      Prevent entry of foreign objects by covering the fuel injector assembly with plastic bags.

    4. B008J35

      Remove the 4 injector vibration insulators from the cylinder head sub-assembly.