POWER WINDOW CONTROL SYSTEM(w/ Jam Protection Function) Jam Protection Function does not Operate

DTC Code	DTC Name
	Jam Protection Function does not Operate

DESCRIPTION

The jam protection function operates within a specified range during the manual up or auto up operation.

CAUTION / NOTICE / HINT

Note:

If the front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD) has been replaced with a new one, initialize the power window control system.

Click here Click here

PROCEDURE

PERFORM INITIALIZATION

Initialize the front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD).
Click here Click here

Result


Proceed to
NEXT

Check if the power window auto up and down function operates normally.
Click here Click here

Result


Proceed to
Driver door auto up and down function is normal
Driver door auto up and down function is not normal

Driver door auto up and down function is not normal

GO TO OTHER PROBLEM

Click here Click here

Driver door auto up and down function is normal

CHECK JAM PROTECTION FUNCTION OPERATING RANGE

Check if the jam protection function operates normally for the driver door power window.

Tip:
The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.

Result


Proceed to
Jam protection function operates normally
Jam protection function does not operate normally (for LHD)
Jam protection function does not operate normally (for RHD)

Jam protection function operates normally

END (PROBLEM DUE TO INITIALIZATION FAILURE)

Jam protection function does not operate normally (for LHD)

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

Click here Click here

Jam protection function does not operate normally (for RHD)

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

Click here Click here