FRONT DOOR WINDOW FRAME MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE

  1. INSTALL FRONT DOOR REAR WINDOW FRAME MOULDING

    Tip:

    When installing a new front door rear window frame moulding, heat the vehicle body and front door rear window frame moulding using a heat light.

    Table 1. Heating Temperature

    Item

    Temperature

    Vehicle Body

    40 to 60°C (104 to 140°F)

    Front Door Rear Window Frame Moulding

    20 to 30°C (68 to 86°F)
    Note:

    Do not heat the vehicle body or front door rear window frame moulding excessively.

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new front door rear window frame moulding.

      1. Using a heat light, heat the vehicle body and front door rear window frame moulding.

      2. Remove the release paper from the face of the front door rear window frame moulding.

        Tip:

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. B329289C02
        V100155

        Double-sided Tape

        Engage the clip and guide, and install the front door rear window frame moulding.

  2. CONNECT FRONT DOOR WEATHERSTRIP

    1. for Hatchback, Wagon:

      1. Engage the 2 clips and install the front door weatherstrip.

    2. for Sedan:

      1. Engage the clip and install the front door weatherstrip.

  3. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY

    Click hereClick here