YAW RATE AND DECELERATION SENSOR (w/ VSC) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT SEAT ASSEMBLY RH


    1. for Separate Seat Type:

      Remove the front seat assembly RH Click here.

    2. w/ Front Seat Side Airbag:

      Remove the front seat assembly RH Click here.

    3. for Bench Seat Type:

      Remove the front seat assembly RH Click here.

    4. for Power Seat:

      Remove the front seat assembly RH Click here.

  3. REMOVE FLOOR CARPET COVER


    1. A01DYS6

      Detach the 4 claws and remove the floor carpet cover.

  4. REMOVE SENSOR BRACKET


    1. Remove the 2 bolts and sensor bracket.

  5. REMOVE YAW RATE SENSOR ASSEMBLY


    1. A01E06DE01

      Remove the yaw rate sensor.

    2. Disconnect the connector.