KINETIC DYNAMIC SUSPENSION SYSTEM, Diagnostic DTC:U0100/71,U0122/71,U0124/71 and U0126/71
| DTC Code | DTC Name |
|---|---|
| U0100/71 | Lost Communication with ECM/PCM "A" |
| U0122/71 | Lost Communication with Vehicle Dynamics Control Module |
| U0124/71 | Lost Communication with Lateral Acceleration Sensor Module |
| U0126/71 | Lost Communication with Steering Angle Sensor Module |
DESCRIPTION
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
U0100/71 |
Lost Communication with ECM/PCM "A" |
While driving at 19 mph (30 km/h), the ECM indicates a CAN communication stop for 3 seconds or more. |
CAN communication system |
U0122/71 |
Lost Communication with Vehicle Dynamics Control Module |
The skid control ECU indicates a CAN communication stop for 3 seconds or more. |
CAN communication system |
U0124/71 |
Lost Communication with Lateral Acceleration Sensor Module |
The yaw rate and acceleration sensor indicates a CAN communication stop for 3 seconds or more. |
CAN communication system |
U0126/71 |
Lost Communication with Steering Angle Sensor Module |
The steering angle sensor indicates a CAN communication stop for 3 seconds or more. |
CAN communication system |
PROCEDURE
CHECK DTC
Clear the DTC.
Chassis > KDSS > Clear DTCs
Perform a road test.
Check for DTCs.
Result
Result
Proceed to
DTC is not output
A
DTC is output
B
Tip:If a CAN communication malfunction DTC and a related sensor malfunction DTC are output at the same time, the CAN communication malfunction must be repaired before troubleshooting the sensor malfunction DTC.
Chassis > KDSS > Trouble Codes