AIRBAG CUT-OFF SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  3. REMOVE AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY

    1. B223181

      Detach the 2 claws and remove the cutoff switch cylinder.

    2. Disconnect the connector.