REAR SEAT OUTER BELT ASSEMBLY(for Wagon) REMOVAL
CAUTION / NOTICE / HINT
Use the same procedure for the RH side and LH side.
The procedure described below is for the LH side.
PROCEDURE
REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board)
REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)
REMOVE FRONT DECK FLOOR BOX (w/ Deck Board)
REMOVE REAR FLOOR MAT ASSEMBLY
REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (for LH Side)
w/ Deck Board:
REMOVE DECK FLOOR BOX LH (for LH Side)
w/o Woofer:
REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY (for RH Side)
w/ Deck Board:
REMOVE DECK FLOOR BOX RH (for RH Side)
REMOVE TONNEAU COVER ASSEMBLY
REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)
REMOVE REAR DECK TRIM COVER
REMOVE REAR SEAT CUSHION ASSEMBLY
REMOVE REAR SEAT HEADREST ASSEMBLY
REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)
DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for RH Side)
DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY
REMOVE REAR SEATBACK ASSEMBLY LH (for LH Side)
REMOVE REAR SEATBACK ASSEMBLY RH (for RH Side)
REMOVE REAR DOOR SCUFF PLATE
DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP
REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY
REMOVE REAR SEAT SIDE GARNISH
REMOVE NO. 2 DECK SIDE TRIM HOOK
REMOVE RECLINING REMOTE CONTROL BEZEL
REMOVE DECK TRIM SIDE PANEL ASSEMBLY
REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY
-
Remove the bolt and disconnect the floor anchor of the rear seat 3 point type outer belt assembly.
-
Remove the nut.
Disengage the guide to remove the rear seat 3 point type outer belt assembly.
-