TIRE AND WHEEL SYSTEM INSPECTION

PROCEDURE


  1. INSPECT TIRES


    1. Check the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure
      Tire Size

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)
      205/55R16 91V 240 (2.4, 35) 240 (2.4, 35)
      215/45R17 87W 240 (2.4, 35) 240 (2.4, 35)
      T135/80D 16 101M 420 (4.2, 60) 420 (4.2, 60)
    2. A004K8F

      Using a dial indicator, check the runout of the wheel.

      Maximum wheel runout
      Steel wheel 2.0 mm (0.0787 in.) (Vertical and lateral)
      Aluminum wheel 1.0 mm (0.0394 in.) (Vertical and lateral)

  2. ROTATE TIRES


    1. A004IC7

      Rotate the tires as shown in the illustration.

      Text in Illustration
      A004I9S Front of the Vehicle
      Torque:
      120 N*m  { 1224 kgf*cm, 89 ft.*lbf }

  3. INSPECT WHEEL BALANCE


    1. Check and perform off-car balancing.

    2. If required, perform on-car balancing.

      Imbalance after adjustment
      10.0 g (0.0220 lb) or less

  4. INSPECT FRONT AXLE HUB BEARING LOOSENESS

    Click here

  5. INSPECT REAR AXLE HUB BEARING LOOSENESS

    Click here

  6. INSPECT FRONT AXLE HUB RUNOUT

    Click here

  7. INSPECT REAR AXLE HUB RUNOUT

    Click here