ENGINE ASSEMBLY COMPONENTS
ILLUSTRATION
*A |
for Type A |
*B |
for Type B |
*1 |
ENGINE ROOM SIDE COVER |
*2 |
ENGINE ROOM SIDE COVER LH |
*3 |
LOWER FRONT BUMPER COVER |
*4 |
NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
*5 |
REAR ENGINE UNDER COVER ASSEMBLY |
*6 |
TRANSMISSION UNDER COVER |
 |
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*1 |
COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY |
*2 |
FRONT BUMPER COVER |
*3 |
HOOD SUB-ASSEMBLY |
*4 |
RADIATOR SIDE DEFLECTOR LH |
*5 |
RADIATOR SIDE DEFLECTOR RH |
*6 |
UPPER RADIATOR SUPPORT SEAL |
*7 |
FRONT WIPER ARM AND BLADE ASSEMBLY LH |
*8 |
FRONT WIPER ARM AND BLADE ASSEMBLY RH |
*9 |
FRONT WIPER ARM HEAD CAP |
*10 |
FRONT FENDER TO COWL SIDE SEAL RH |
*11 |
RADIATOR GRILLE |
*12 |
FRONT FENDER TO COWL SIDE SEAL LH |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*1 |
AIR CLEANER CAP AND HOSE |
*2 |
AIR CLEANER CASE SUB-ASSEMBLY |
*3 |
AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY |
*4 |
BATTERY |
*5 |
BATTERY TRAY |
*6 |
V-BANK COVER SUB-ASSEMBLY |
*7 |
BATTERY HOLD DOWN CLAMP |
*8 |
MASS AIR FLOW METER CONNECTOR |
*9 |
NO. 1 AIR HOSE |
*10 |
NO. 2 VENTILATION HOSE |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*1 |
FAN SHROUD |
*2 |
NO. 1 RADIATOR HOSE |
*3 |
NO. 2 RADIATOR HOSE |
*4 |
OIL COOLER ACCESSORY ASSEMBLY |
*5 |
RADIATOR ASSEMBLY |
*6 |
RADIATOR RESERVOIR ASSEMBLY |
*7 |
RADIATOR CAP SUB-ASSEMBLY |
*8 |
NO. 1 RADIATOR SUPPORT |
*9 |
NO. 1 RADIATOR SUPPORT BUSH |
*10 |
NO. 2 RADIATOR SUPPORT |
*11 |
FAN AND GENERATOR V-BELT |
*12 |
FAN PULLEY |
*13 |
FAN |
*14 |
FLUID COUPLING ASSEMBLY |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*A |
for Single Air Conditioning System |
*B |
for Dual Air Conditioning System |
*1 |
FRONT FENDER APRON SEAL LH |
*2 |
FRONT FENDER APRON SEAL RH |
*3 |
FRONT NO. 1 FENDER APRON TO FRAME SEAL LH |
*4 |
FRONT NO. 1 FENDER APRON TO FRAME SEAL RH |
*5 |
WATER PIPE AND HOSE SUB-ASSEMBLY |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*A |
w/ EGR System |
- |
- |
*1 |
EGR VALVE ASSEMBLY |
*2 |
EGR VALVE BRACKET |
*3 |
NO. 12 WATER BY-PASS HOSE |
*4 |
NO. 13 WATER BY-PASS HOSE |
*5 |
GASKET |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*A |
w/o EGR System |
- |
- |
*1 |
EGR VALVE BRACKET |
*2 |
INTAKE FLANGE |
*3 |
NO. 12 WATER BY-PASS HOSE |
*4 |
NO. 13 WATER BY-PASS HOSE |
*5 |
NO. 5 WATER BY-PASS PIPE |
*6 |
GASKET |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*1 |
AIR TUBE SUB-ASSEMBLY |
*2 |
ENGINE WIRE |
*3 |
NO. 4 WATER BY-PASS PIPE |
*4 |
PURGE LINE HOSE |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*1 |
INTAKE MANIFOLD |
*2 |
VENTILATION HOSE ASSEMBLY |
*3 |
GASKET |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*1 |
COOLER COMPRESSOR ASSEMBLY |
*2 |
DISCHARGE HOSE SUB-ASSEMBLY |
*3 |
GENERATOR ASSEMBLY |
*4 |
NO. 1 OIL RESERVOIR TO PUMP HOSE |
*5 |
PRESSURE FEED TUBE |
*6 |
SUCTION HOSE SUB-ASSEMBLY |
*7 |
VANE PUMP ASSEMBLY |
*8 |
TERMINAL CAP |
*9 |
WIRE HARNESS BRACKET |
*10 |
STUD BOLT |
*11 |
UNION BOLT |
*12 |
GASKET |
*13 |
O-RING |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
 |
Compressor oil ND-OIL 8 or equivalent |
- |
- |
ILLUSTRATION
*1 |
EXHAUST PIPE STOPPER BRACKET |
*2 |
FRONT EXHAUST PIPE ASSEMBLY |
*3 |
FRONT NO. 2 EXHAUST PIPE ASSEMBLY |
*4 |
COMPRESSION SPRING |
*5 |
EXHAUST PIPE SUPPORT |
*6 |
GASKET |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*A |
w/ EGR System |
- |
- |
*1 |
ENGINE OIL LEVEL DIPSTICK GUIDE |
*2 |
EXHAUST MANIFOLD ASSEMBLY LH |
*3 |
EXHAUST MANIFOLD ASSEMBLY RH |
*4 |
FLYWHEEL HOUSING SIDE COVER |
*5 |
MANIFOLD STAY |
*6 |
NO. 1 EGR PIPE SUB-ASSEMBLY |
*7 |
NO. 1 EXHAUST MANIFOLD HEAT INSULATOR |
*8 |
NO. 2 EXHAUST MANIFOLD HEAT INSULATOR |
*9 |
NO. 2 MANIFOLD STAY |
*10 |
STARTER ASSEMBLY |
*11 |
STARTER COVER |
*12 |
EXHAUST MANIFOLD TO HEAD GASKET |
*13 |
ENGINE OIL LEVEL DIPSTICK |
*14 |
EXHAUST MANIFOLD TO HEAD GASKET LH |
*15 |
STARTER WIRE |
*16 |
GASKET |
*17 |
O-RING |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*A |
w/o EGR System |
- |
- |
*1 |
ENGINE OIL LEVEL DIPSTICK GUIDE |
*2 |
EXHAUST MANIFOLD ASSEMBLY LH |
*3 |
EXHAUST MANIFOLD ASSEMBLY RH |
*4 |
FLYWHEEL HOUSING SIDE COVER |
*5 |
MANIFOLD STAY |
*6 |
NO. 1 EXHAUST MANIFOLD HEAT INSULATOR |
*7 |
NO. 2 EXHAUST MANIFOLD HEAT INSULATOR |
*8 |
NO. 2 MANIFOLD STAY |
*9 |
STARTER ASSEMBLY |
*10 |
STARTER COVER |
*11 |
EXHAUST MANIFOLD TO HEAD GASKET |
*12 |
ENGINE OIL LEVEL DIPSTICK |
*13 |
EXHAUST MANIFOLD TO HEAD GASKET LH |
*14 |
STARTER WIRE |
*15 |
GASKET |
*16 |
O-RING |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*1 |
ENGINE WIRE |
*2 |
ECM CONNECTOR |
*3 |
FUEL HOSE |
*4 |
NO. 2 FUEL TUBE SUB-ASSEMBLY |
*5 |
FUEL PIPE CLAMP |
*6 |
GROMMET |
*7 |
GROUND WIRE |
*8 |
NO. 2 ENGINE WIRE |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*1 |
FRONT PROPELLER SHAFT ASSEMBLY |
*2 |
PROPELLER SHAFT ASSEMBLY |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
 |
Do not apply lubricants |
ILLUSTRATION
*1 |
AUTOMATIC TRANSMISSION ASSEMBLY |
*2 |
NO. 1 WATER BY-PASS PIPE |
*3 |
OIL COOLER TUBE SUB-ASSEMBLY |
*4 |
REAR NO. 1 ENGINE MOUNTING INSULATOR |
*5 |
NO. 2 OIL COOLER HOSE |
*6 |
TRANSMISSION OIL COOLER ASSEMBLY |
*7 |
WIRE HARNESS AND CONNECTOR |
*8 |
NO. 2 WIRE HARNESS HEAT INSULATOR |
*9 |
NO. 1 TRANSMISSION CONTROL CABLE BRACKET |
*10 |
REAR ENGINE MOUNTING HEAT INSULATOR |
*11 |
TRANSMISSION CONTROL CABLE ASSEMBLY |
*12 |
FRONT SUSPENSION MEMBER BRACKET LH |
*13 |
FRONT SUSPENSION MEMBER BRACKET RH |
*14 |
NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*1 |
DRIVE PLATE AND RING GEAR SUB-ASSEMBLY |
*2 |
DRIVE PLATE AND TORQUE CONVERTER CLUTCH SETTING BOLT |
*3 |
ENGINE HANGER |
*4 |
CRANKSHAFT ANGLE SENSOR ROTOR |
*5 |
REAR DRIVE PLATE SPACER |
*6 |
FRONT ENGINE MOUNTING INSULATOR RH |
*7 |
FRONT ENGINE MOUNTING INSULATOR LH |
- |
- |
*a |
BLACK |
*b |
SILVER |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
★ |
Precoated part |
- |
- |
T1 |
1st: 30 (301, 22) 2nd: Turn 90° |
- |
- |