CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the front passenger side of RHD and LHD vehicles.
The procedures listed below are for the front passenger side of an LHD vehicle.
PROCEDURE
INSTALL AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY
Engage the 2 claws to install the airbag cut off switch cylinder sub-assembly.
INSTALL INSTRUMENT PANEL FINISH PANEL END RH
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
INSTALL INSTRUMENT PANEL BOX ASSEMBLY
CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH
INSTALL COWL SIDE TRIM BOARD RH
Tech Tips
Use the same procedure for the RH side and LH side Click here.
INSTALL FRONT DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure for the RH side and LH side Click here.
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL DECK FLOOR BOX RH
INSTALL REAR DECK FLOOR BOX
INSTALL NO. 1 DECK BOARD
INSTALL NO. 2 DECK BOARD
INSTALL DECK BOARD ASSEMBLY
PERFORM DIAGNOSTIC SYSTEM CHECK
INSPECT SRS WARNING LIGHT