AIR CONDITIONING PANEL (for Manual Air Conditioning System) INSPECTION


  1. INSPECT AIR CONDITIONING CONTROL ASSEMBLY


    1. A01E230E01
      Text in Illustration
      *a

      Component without harness connected

      (Air Conditioning Control Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 - 4 - 5 - 6 OFF 10 kΩ or higher
      5 - 6 LO Below 1 Ω
      2 - 5 - 6 LO - M1 Below 1 Ω
      2 - 5 - 6 M1 Below 1 Ω
      1 - 2 - 5 - 6 M1 - M2 Below 1 Ω
      1 - 5 - 6 M2 Below 1 Ω
      1 - 4 - 5 - 6 M2 - HI Below 1 Ω
      4 - 5 - 6 HI Below 1 Ω

      If the result is not as specified, replace the air conditioning control assembly.

    2. Inspect illuminations.


      1. Connect the positive (+) lead of the battery to terminal 8 and negative (-) lead to terminal 3. Check that the bulbs illuminate.

        If a bulb does not illuminate, replace it.