PRE-CRASH SAFETY SYSTEM CANCEL SWITCH REMOVAL

PROCEDURE

  1. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

    Click here

  3. REMOVE PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (w/o Stop And Start System)

    E319085

    1. Disengage the 2 claws to remove the pre-crash system cancel switch assembly from the lower instrument panel finish panel.

  4. REMOVE PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (COMBINATION SWITCH ASSEMBLY) (w/ Stop And Start System)

    1. E319086

      Disengage the 2 claws to remove the pre-crash system cancel switch assembly (combination switch assembly) from the lower instrument panel finish panel.