ULTRASONIC SENSOR(for Sedan Front Side) REMOVAL

PROCEDURE

  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 1 ULTRASONIC SENSOR

    Tip:

    • These illustrations are for the LH side. The orientation for the RH side is the opposite of the LH side.

    • Use the same procedure for all No. 1 ultrasonic sensors.

    1. E278872

      Disconnect the connector.

    2. E278874

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

  3. REMOVE ULTRASONIC SENSOR CLIP

    1. E278873

      Disengage the 2 claws to remove the ultrasonic sensor clip.

      Tip:

      • This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

      • Use the same procedure for all ultrasonic sensor clips.

  4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

  5. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Simple Intelligent Parking Assist System)

    Tip:

    • These illustrations are for the LH side. The orientation for the RH side is the opposite of the LH side.

    • Use the same procedure for all No. 2 ultrasonic sensors.

    1. E278876

      Using a screwdriver with its tip wrapped with protective tape, slide the connector lock as shown in the illustration.

    2. E278878

      Disconnect the connector.

    3. E278879

      Disengage the 2 claws to remove the No. 2 ultrasonic sensor.

  6. REMOVE ULTRASONIC SENSOR CLIP (w/ Simple Intelligent Parking Assist System)

    1. E278880

      Disengage the 2 claws to remove the ultrasonic sensor clip.

      Tip:

      • This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

      • Use the same procedure for all ultrasonic sensor clips.

  7. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Simple Intelligent Parking Assist System)