CONDENSER ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT COOLER CONDENSER ASSEMBLY

   
   

   1. If the cooler condenser assembly fins are dirty, clean them with water and dry with compressed air.

      Note

      Do not damage the condenser assembly fins.

   2. If any cooler condenser assembly fins are bent, straighten them using a screwdriver or pliers.

2. INSPECT FOR REFRIGERANT LEAK

   
   

   1. Using a halogen leak detector, check pipe joints for refrigerant leakage.

   2. If refrigerant leakage is detected in a joint, check the torque of the joint.