OUTER REAR VIEW MIRROR GLASS REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE MIRROR SUB-ASSEMBLY LH

    B339867E02

    1. Put protective tape around the mirror sub-assembly LH.

      Table 1. Text in Illustration

      *1

      Moulding Remover

      *2

      Protective Tape

    2. Using a moulding remover, detach the 8 claws at the mirror sub-assembly LH as shown in the illustration.

    3. B339869

      Disconnect the 2 connectors and remove the mirror sub-assembly LH.