GENERATOR(for 130 A Type) INSTALLATION

PROCEDURE

  1. INSTALL GENERATOR ASSEMBLY

    1. Install the generator with the 3 bolts and nut.

      43 N*m

      438 kgf*cm

      32 ft.*lbf

    2. Connect the wire harness bracket to the generator with the bolt.

      24 N*m

      245 kgf*cm

      18 ft.*lbf

    3. Attach the generator wire.

    4. Connect the generator wire with the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

    5. Install the terminal cap.

    6. Connect the generator connector.

    7. A230309

      Connect the No. 2 return tube bracket with the bolt.

      28 N*m

      286 kgf*cm

      21 ft.*lbf

  2. CONNECT VANE PUMP ASSEMBLY

    1. Connect the vane pump with the 2 bolts.

      43 N*m

      438 kgf*cm

      32 ft.*lbf

    2. Attach the clamp and connect the connector.

  3. INSTALL FRONT FENDER APRON SEAL RH

    Click hereClick hereClick here

  4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click hereClick hereClick here

  5. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  6. INSTALL AIR CLEANER CAP AND HOSE

    Click hereClick hereClick here

  7. INSTALL RADIATOR ASSEMBLY

    1. Install the radiator assembly (Click hereClick here).

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick here).