ENGINE OIL TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. DRAIN ENGINE OIL

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  4. REMOVE ENGINE OIL TEMPERATURE SENSOR


    1. B0087FK

      Disconnect the engine oil temperature sensor connector.

    2. B0088P2N01

      Using SST, remove the engine oil temperature sensor from the water inlet housing sub-assembly.

      SST
      09817-33191

      Note

      If the engine oil temperature sensor has been struck or dropped, replace it.

    3. Remove the gasket from the engine oil temperature sensor.