MAYDAY BATTERY REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the mayday battery removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedure Effect/Inoperative when not Performed Link
Telematics transceiver Register vehicle information Emergency call service

Click here

Mobilephone battery Reset mobilephone battery condition

PROCEDURE


  1. REMOVE TELEMATICS TRANSCEIVER

    Click here

  2. REMOVE MOBILEPHONE BATTERY


    1. A001WLXC01
      B008LJK Remove in this Direction (1)
      B008KJ9 Remove in this Direction (2)

      Loosen the 2 screws.

    2. Disengage the claws and guides to remove the cover sub-assembly as shown in the illustration.

    3. A001TPI

      Disconnect the connector.

    4. Remove the mobilephone battery.