DIFFERENTIAL PRESSURE SENSOR INSTALLATION

PROCEDURE

  1. INSTALL DIFFERENTIAL PRESSURE SENSOR

    1. Install the 2 No. 1 vacuum transmitting hoses to the differential pressure sensor.

    2. Connect the 2 No. 1 vacuum transmitting hoses to the exhaust manifold converter sub-assembly.

    3. Using a T20 "TORX" socket wrench, install the differential pressure sensor with the screw.

      4.0 N*m

      41 kgf*cm

      35 in.*lbf

    4. Connect the differential pressure sensor connector and slide the white-colored lock to engage it securely.

  2. INSTALL NO. 1 ENGINE COVER

    Click hereClick here

  3. PERFORM INITIALIZATION

    Click here