REAR NO. 2 SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR NO. 2 SEAT INNER BELT ASSEMBLY LH


    1. A005DKJE02
      Text in Illustration
      *a

      Component without harness connected

      (Rear No. 2 Seat Inner Belt Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4 Rear No. 2 seat belt LH not fastened Below 1 Ω
      3 - 4 Rear No. 2 seat belt LH fastened 10 kΩ or higher

      If the result is not as specified, replace the rear No. 2 seat inner belt assembly LH.

  2. INSPECT REAR NO. 2 SEAT INNER BELT ASSEMBLY RH


    1. A005D0GE02
      Text in Illustration
      *a

      Component without harness connected

      (Rear No. 2 Seat Inner Belt Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1 - A-2 Rear No. 2 seat belt RH not fastened Below 1 Ω
      A-1 - A-2 Rear No. 2 seat belt RH fastened 10 kΩ or higher
      A-3 - B-3 Always Below 1 Ω
      A-4 - B-4 Always Below 1 Ω

      If the result is not as specified, replace the rear No. 2 seat inner belt assembly RH.