REAR AIRBAG SENSOR(w/ Rear No. 2 Seat) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

2. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click hereClick here

3. REMOVE DECK BOARD ASSEMBLY

   Click hereClick here

4. REMOVE DECK RAIL COVER (w/o Spare Tire)

   Click hereClick here

5. REMOVE LUGGAGE COMPARTMENT TRAY (w/ Spare Tire)

   Click hereClick here

6. REMOVE DECK FLOOR BOX LH

   Click hereClick here

7. REMOVE DECK FLOOR BOX RH

   Click hereClick here

8. REMOVE DECK TRIM SIDE BELT HOLE COVER LH

   Click hereClick here

9. REMOVE DECK TRIM SIDE BELT HOLE COVER RH

   Click hereClick here

10. REMOVE REAR NO. 2 SEAT TRACK BRACKET COVER

    Click here

11. REMOVE REAR NO. 2 SEAT TRACK COVER

    Click here

12. REMOVE REAR NO. 2 SEAT ASSEMBLY

    Click here

13. REMOVE REAR DECK TRIM COVER

    Click hereClick here

14. REMOVE REAR DOOR SCUFF PLATE LH

    Click hereClick here

15. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click hereClick here

16. REMOVE FRONT DECK SIDE TRIM COVER LH

    Click hereClick here

17. REMOVE DECK TRIM SIDE SERVICE HOLE COVER

    Click hereClick here

18. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click hereClick here

19. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click hereClick here

20. REMOVE REAR AIRBAG SENSOR LH

    1. 

       Remove the bolt and rear airbag sensor.

    2. Disconnect the connector.