CLIMATE CONTROL SEAT SYSTEM TERMINALS OF ECU


  1. CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY

    A01ODSFN11

    1. Disconnect the O9 air conditioning amplifier assembly connector.

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Tech Tips

      Measure the values on the wire harness side with the connector disconnected.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      O9-5 (IG+) - Body ground R - Body ground Air conditioning amplifier power supply Power switch off Below 1 V
      O9-5 (IG+) - Body ground R - Body ground Air conditioning amplifier power supply Power switch on (IG) 11 to 14 V
      O9-1 (GND) - Body ground BR - Body ground Air conditioning amplifier ground Always Below 1 Ω

    3. Reconnect the O9 air conditioning amplifier assembly connector.

    4. Check for pulses according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      O9-10 (LOUT) - Body ground G - Body ground Climate control blower control signal

      • Power switch on (IG)

      • Refreshing seat switch (for LH) on

        (blower position)

      Pulse generation

      (See waveform)
      O9-11 (ROUT) - Body ground BE - Body ground Climate control blower control signal

      • Power switch on (IG)

      • Refreshing seat switch (for RH) on

        (blower position)

      Pulse generation

      (See waveform)
      O9-20 (LIN1) - Body ground P - Body ground Refreshing seat switch signal Power switch on (IG) Pulse generation

      1. A01OB02N02

        Waveform (Reference):

        Measurement Condition
        Item Content
        Tester Connection

        • O9-10 (LOUT) - Body ground

        • O9-11 (ROUT) - Body ground
        Tool Setting 1 V/DIV., 1 ms/DIV.
        Vehicle Condition

        • Power switch on (IG)

        • Refreshing seat switch on

          (blower position)

  2. REFRESHING SEAT SWITCH

    A01OA8WN07

    1. Disconnect the O94 refreshing seat switch connector.

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Tech Tips

      Measure the values on the wire harness side with the connector disconnected.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      O94-1 (IG) - Body ground P - Body ground Refreshing seat switch power supply Power switch off Below 1 V
      O94-1 (IG) - Body ground P - Body ground Refreshing seat switch power supply Power switch on (IG) 11 to 14 V
      O94-4 (E) - Body ground W-B - Body ground Refreshing seat switch ground Always Below 1 Ω

    3. Reconnect the O94 refreshing seat switch connector.

    4. Check for pulses according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      O94-7 (SW) - Body ground P - Body ground Refreshing seat switch signal Power switch on (IG) Pulse generation