OIL LEVEL SENSOR INSTALLATION

PROCEDURE


  1. INSTALL OIL LEVEL SENSOR BRACKET


    1. Install the engine oil level sensor bracket.

  2. INSTALL ENGINE OIL LEVEL SENSOR

    Note


    • Be careful not to allow engine oil to contact the terminals.

    • Do not use a brakes cleaner or a solvent on a connector.


    1. Install the engine oil level sensor with the 2 nuts and attach the clamp.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Apply a light coat of engine oil to the O-ring of the engine oil level sensor.

    3. B005R08

      Install a new clip to the engine oil level sensor as shown in the illustration.

    4. Connect the engine oil level sensor connector.

  3. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY

    Click here

  4. ADD ENGINE OIL

    Click here

  5. INSPECT FOR OIL LEAK

    Click here

  6. INSPECT ENGINE OIL LEVEL

    Click here

  7. INSTALL STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY

    Click here

  8. INSTALL FRONT SUSPENSION MEMBER BRACE

    Click here

  9. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  10. INSTALL TRANSMISSION UNDER COVER

    Click here

  11. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here