ENGINE OIL TEMPERATURE SENSOR INSPECTION

PROCEDURE


  1. INSPECT ENGINE OIL TEMPERATURE SENSOR

    CAUTION:


    • Do not put your hands into the water that has been heated for the inspection.

    • Touching the heated water could result in burns.

    B0084C9

    1. B0084X6C01
      *a

      Component without harness connected

      (Engine Oil Temperature Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 30°C (86°F) 2.465 to 3.213 kΩ

      Note

      If checking the engine oil temperature sensor in water, be careful not to allow water to contact the terminals. After checking, wipe the water off the engine oil temperature sensor.

      If the result is not as specified, replace the engine oil temperature sensor.