8NR-FTS AIR CLEANER FILTER ELEMENT REMOVAL

PROCEDURE


  1. SEPARATE AIR CLEANER CAP SUB-ASSEMBLY


    1. A001UCJ

      Disconnect the 2 clamp hooks from the air cleaner cap sub-assembly.

    2. A001XCD

      Disengage the 2 guides and separate the air cleaner cap sub-assembly together with air cleaner hose assembly from the air cleaner case sub-assembly.

  2. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY


    1. A001T3H

      Remove the air cleaner filter element sub-assembly from the air cleaner case sub-assembly.

      Note

      Do not allow foreign matter to enter the air cleaner case sub-assembly.

  3. INSPECT AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Tech Tips

    This procedure is only performed when the air cleaner filter element sub-assembly will be reused.


    1. Check whether the air cleaner filter element sub-assembly is dirty or clogged.

    2. A001U26C02
      *a Air Cleaner Filter Element Sub-assembly Intake Downstream Side (Throttle Body with Motor Assembly Side)

      If the air cleaner filter element sub-assembly is dirty or has foreign matter adhered to it, clean the air cleaner filter element sub-assembly with compressed air.

      Note

      When cleaning the air cleaner filter element sub-assembly, blow the compressed air from the intake downstream side (from the throttle body with motor assembly side).

      If the air cleaner filter element sub-assembly is still extremely dirty after cleaning it, replace the air cleaner filter element sub-assembly with a new one.