CLUTCH PEDAL(for LHD) INSTALLATION

PROCEDURE

  1. INSTALL CLUTCH PEDAL PAD

    1. Install the clutch pedal pad to the clutch pedal sub-assembly

  2. INSTALL CLUTCH PEDAL TURNOVER BUSH

    C279726C01
    V100135

    MP Grease

    1. Apply MP grease to the contact surface of the clutch pedal turnover bush.

    2. Install the clutch pedal turnover bush.

    3. Install the 2 clutch pedal cushions to the clutch pedal sub-assembly.

  3. INSTALL CLUTCH PEDAL SHAFT COLLAR

    C279724C01
    V100135

    MP Grease

    1. Apply MP grease to both sides of a clutch pedal shaft collar and 2 new bushes.

    2. Install the clutch pedal shaft collar.

    3. Install the 2 bushes.

  4. INSTALL CLUTCH PEDAL SPRING HOLDER

    C279723C01
    V100135

    MP Grease

    1. Apply MP grease to the contact surface of the clutch pedal spring holder.

    2. Install the clutch pedal spring holder.

  5. INSTALL CLUTCH PEDAL SUB-ASSEMBLY

    1. Install the clutch pedal sub-assembly to the clutch pedal support sub-assembly with the bolt and nut.

      37 N*m

      377 kgf*cm

      27 ft.*lbf

      Tip:

      Install the bolt from the right side of the vehicle.

  6. INSTALL NO. 1 PEDAL SPRING HOOK

    C279727C01
    V100135

    MP Grease

    1. Apply MP grease to the contact surface of the No. 1 pedal spring hook.

    2. Install the No. 1 pedal spring hook.

  7. INSTALL CLUTCH PEDAL SPRING WITH HOOK

    1. Apply MP grease to the contact surface of the clutch pedal spring with hook.

    2. Install the clutch pedal spring with hook to the No. 1 pedal spring hook.

    3. C125483C01
      V100135

      MP Grease

      Install the clutch pedal spring with hook to the clutch pedal sub-assembly.

  8. INSTALL CLUTCH PEDAL SPRING

    C279722C01
    V100135

    MP Grease

    1. Apply MP grease to the contact surface of the clutch pedal spring.

    2. Install the clutch pedal spring.

  9. INSTALL CLUTCH START SWITCH ASSEMBLY

    Click here

  10. INSTALL CLUTCH SWITCH ASSEMBLY

    Click here

  11. INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY

    C278063N01

    1. Install the clutch pedal support sub-assembly.

    2. Install the bolt and 2 nuts.

      for nut A

      13 N*m

      133 kgf*cm

      10 ft.*lbf

      for bolt B

      24 N*m

      245 kgf*cm

      18 ft.*lbf

    3. Connect the 2 connectors and clamp.

  12. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS WITH HOLE PIN

    C279741C01
    V100135

    MP grease

    1. Apply Mp grease to the contact surface of the clutch master cylinder push rod clevis with hole pin.

    2. Connect the clevis to the clutch pedal assembly with the clutch master cylinder push rod clevis with hole pin.

      Tip:

      install the clutch master cylinder push rod clevis with hole pin from the right side of the vehicle.

    3. Install a new clip to the clutch master cylinder push rod clevis with hole pin.

  13. INSTALL UPPER INSTRUMENT PANEL

    Click hereClick here

  14. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

    Click here

  15. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Driver Side Knee Airbag)

    Click hereClick hereClick here

  16. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

    Click hereClick hereClick here

  17. INSPECT AND ADJUST CLUTCH PEDAL SUB-ASSEMBLY

    Click here