ROOM TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR

   1. Connect the connector and aspirator.

   2. Engage the 2 claws to install the cooler (room temp. sensor) thermistor.

2. INSTALL NO. 1 SWITCH HOLE BASE (except Sedan)

   for LHD:

   Click here

   for RHD:

   Click here

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (except Sedan)

   Click here

4. INSTALL NO. 1 METER HOOD CLUSTER (except Sedan)

   Click here

5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except Sedan)

   Click here

6. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (except Sedan)

   Click here

7. INSTALL NO. 1 SWITCH HOLE BASE (for Sedan)

   for LHD:

   Click here

   for RHD:

   Click here

8. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Sedan)

   Click here

9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Sedan)

   Click here

10. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)

    Click here

11. INSTALL NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY (for Sedan)

    Click here

12. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)

    Click here

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for LHD with Entry and Start System)

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here