TIRE PRESSURE WARNING RECEIVER(for Sedan) INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

   1. Connect the connector to the tire pressure warning ECU and receiver.

   2. 

      Engage the 2 hooks to temporarily install the tire pressure warning ECU and receiver.

   3. Install the bolt.

      8.3 N*m

      85 kgf*cm

      73 in.*lbf

2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

   Click hereClick hereClick here

3. INSTALL REAR SEAT SIDE GARNISH RH

   Click hereClick hereClick here

4. INSTALL REAR DOOR SCUFF PLATE RH

   Click hereClick hereClick here

5. INSTALL REAR SEAT CUSHION LOCK HOOK

   Click here

6. INSTALL REAR SEATBACK ASSEMBLY RH

   Click here

7. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

8. INSTALL REAR SEAT HEADREST ASSEMBLY

9. INSTALL REAR SEAT CUSHION ASSEMBLY

   Click here

10. INSTALL SPARE WHEEL COVER

    Click here

11. REGISTER TRANSMITTER ID

    Click here

12. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

13. PERFORM INITIALIZATION

    Click here