BACK-UP LIGHT SWITCH INSPECTION


  1. INSPECT BACK-UP LIGHT SWITCH (M/T MODELS)


    1. B007RSEE01

      Remove the back-up light switch.

    2. Measure the resistance according to the value(s) in the table below.

      Resistance
      Tester connection Switch operation Specified condition
      1 - 2

      Switch ON

      (Ball is not pressed)

      		 10 kΩ or higher
      1 - 2

      Switch OFF

      (Ball is pressed)

      		 Below 1 Ω

      If the result is not as specified, replace the back-up light switch.