LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH INSTALLATION

PROCEDURE

1. INSTALL LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY

   
   

   1. 

      Install in this Direction

      Attach the claw and install the luggage door opening cancel switch assembly.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL GLOVE COMPARTMENT DOOR PAD PLATE

   Click here

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

5. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH

   Click here

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

   Click here

8. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Click here

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

11. INSPECT SRS WARNING LIGHT

    Click here

12. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here