FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT FUEL SENDER GAUGE ASSEMBLY

    1. A390610E01

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      2 - 3

      Float position is F

      (upper)

      13.5 to 16.5 Ω

      Float position is E

      (lower)

      405.5 to 414.5 Ω
      Table 1. Text in Illustration

      *a

      Component without harness connected

      Fuel Sender Gauge Assembly

      If the result is not as specified, replace the fuel sender gauge assembly.