3ZR-FAE DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE REAR ENGINE UNDER COVER RH


    1. A001YFM

      Remove the 2 screws, 6 clips and rear engine under cover RH from the vehicle.

  2. REMOVE FAN AND GENERATOR V BELT


    1. A001VBRC02
      *a 5 mm Bi-hexagon Wrench
      *b Hole
      *c Gap

      Attach a wrench to the hexagonal portion (A) or (B) of the V-ribbed belt tensioner assembly as shown in the illustration.

    2. Rotate the V-ribbed belt tensioner assembly clockwise to align the hole with the gap, and then insert a 5 mm bi-hexagon wrench into the hole and gap to secure the V-ribbed belt tensioner assembly.

    3. Remove the fan and generator V belt from the V-ribbed belt tensioner assembly.