EXHAUST PIPE REMOVAL

PROCEDURE

1. REMOVE HEATED OXYGEN SENSOR

   Click here

2. REMOVE TAIL EXHAUST PIPE ASSEMBLY (except Sedan)

   1. 

      *A

      for Wagon

      

      *A	for Hatchback

      Remove the 2 bolts and 2 compression springs.

   2. Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

      Note:

      Wrap the tail exhaust pipe baffle sub-assembly with a piece of cloth to keep it from damaging the rear bumper.

   3. Remove the gasket from the front exhaust pipe assembly (TWC: Front and Rear Catalyst).

3. REMOVE TAIL EXHAUST PIPE ASSEMBLY (for Sedan)

   1. 

      Remove the 2 bolts.

   2. Remove the tail exhaust pipe assembly from the exhaust pipe support.

   3. Remove the gasket from the center exhaust pipe assembly.

4. REMOVE CENTER EXHAUST PIPE ASSEMBLY (for Sedan)

   1. 

      Remove the 2 bolts and 2 compression springs.

   2. Remove the center exhaust pipe assembly from the exhaust pipe support.

   3. Remove the gasket from the front exhaust pipe assembly (TWC: Front and Rear Catalyst).

5. REMOVE FRONT CENTER FLOOR BRACE SUB-ASSEMBLY

   1. 

      *A	Type A
      *B	Type B

      Remove the 4 bolts and front center floor brace sub-assembly.

6. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Front and Rear Catalyst)

   1. 

      Remove the 2 bolts and 2 compression springs.

   2. Remove the front exhaust pipe assembly (TWC: Front and Rear Catalyst) from the 2 exhaust pipe supports.

   3. Remove the gasket from the exhaust manifold.

7. REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY (w/ Tail Exhaust Pipe Baffle)

   Tip:

   • Perform this procedure only when replacement of the tail exhaust pipe baffle sub-assembly is necessary.

   • If the tail exhaust pipe baffle sub-assembly is removed, replace it with a new one.

   1. 

      *a	Plastic Hammer

      Using a plastic hammer, remove the tail exhaust pipe baffle sub-assembly from the tail exhaust pipe assembly.