CRUISE CONTROL SYSTEM(for 1WW) TC and CG Terminal Circuit

DTC Code DTC Name
TC and CG Terminal Circuit

WIRING DIAGRAM

E290586E02

PROCEDURE

  1. CHECK HARNESS AND CONNECTOR (DLC3 - ECM AND BODY GROUND)

    1. Disconnect the A76 ECM connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      H16-13 (TC) - A76-50 (TC)

      Always

      Below 1 Ω

      H16-4 (CG) - Body ground

      H16-13 (TC) - Body ground

      Always

      10 kΩ or higher

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    (Click here)

    REPAIR OR REPLACE HARNESS OR CONNECTOR