ACCELERATOR PEDAL ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

   1. Connect the GTS to the DLC3.

   2. Turn the ignition switch to ON.

   3. Turn the GTS on.

   4. Enter the following menus: Powertrain / Engine / Data List / Recalculated Accelerator Pedal Position 1 and Recalculated Accelerator Pedal Position 2.

      Powertrain > Engine > Data List

      Tester Display
      Recalculated Accelerator Pedal Position 1
      Recalculated Accelerator Pedal Position 2

   5. Read the values displayed on the GTS.

      Tester Display	Condition	Specified Condition
      Recalculated Accelerator Pedal Position 1	Accelerator pedal fully depressed	100%
      Recalculated Accelerator Pedal Position 2	Accelerator pedal fully depressed	100%

      If the result is not as specified, check the accelerator pedal sensor assembly, wire harness and ECM.