FLOOR SHIFT ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY


    1. Remove the parking brake hole cover Click here.

  3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Remove the upper console panel Click here.

  4. REMOVE CONSOLE BOX ASSEMBLY


    1. Remove the console box Click here.

  5. REMOVE FLOOR SHIFT ASSEMBLY

    A01E2OPE01

    1. Disconnect the 2 connectors and clamp.

    2. Move the shift lever to L.

    3. Disconnect the transmission control cable.

    4. A01E08LE01

      Remove the 4 bolts.

    5. Remove the floor shift.