POWER WINDOW CONTROL SYSTEM DATA LIST / ACTIVE TEST

  1. READ DATA LIST

    Tip:

    Using the intelligent tester to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note:

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / (desired system) / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Table 1. Master Switch

      Tester Display

      Measurement Item/Range

      Normal Condition

      Diagnostic Note

      D Door P/W Auto SW

      Driver side power window auto up/down signal / ON or OFF

      ON: Driver side power window auto up/down switch on power window regulator master switch operated

      OFF: Driver side power window switch on power window regulator master switch not operated

      -

      P Door P/W Auto SW

      Front passenger side power window remote auto up/down signal / ON or OFF

      ON: Front passenger side power window remote auto up/down switch on power window regulator master switch operated

      OFF: Front passenger side power window switch on power window regulator master switch not operated

      -

      RR Door P/W Auto SW*

      Rear power window RH remote auto up/down signal / ON or OFF

      ON: Rear power window RH remote auto up/down switch on power window regulator master switch operated

      OFF: Rear power window switch RH on power window regulator master switch not operated

      -

      RL Door P/W Auto SW*

      Rear power window LH remote auto up/down signal / ON or OFF

      ON: Rear power window LH remote auto up/down switch on power window regulator master switch operated

      OFF: Rear power window switch LH on power window regulator master switch not operated

      -

      P Door P/W Up SW

      Front passenger side power window remote manual up signal / ON or OFF

      ON: Front passenger side power window remote manual up switch on power window regulator master switch operated

      OFF: Front passenger side power window switch on power window regulator master switch not operated

      -

      RR Door P/W up switch*

      Rear power window RH remote manual up signal / ON or OFF

      ON: Rear power window RH remote manual up switch on power window regulator master switch operated

      OFF: Rear power window switch RH on power window regulator master switch not operated

      -

      RL Door P/W up switch*

      Rear power window LH remote manual up signal / ON or OFF

      ON: Rear power window LH remote manual up switch on power window regulator master switch operated

      OFF: Rear power window switch LH on power window regulator master switch not operated

      -

      P Door P/W Down SW

      Front passenger side power window remote manual down signal / ON or OFF

      ON: Front passenger side power window remote manual down switch on power window regulator master switch operated

      OFF: Front passenger side power window switch on power window regulator master switch not operated

      -

      RR Door P/W Down SW*

      Rear power window RH remote manual down signal / ON or OFF

      ON: Rear power window RH remote manual down switch on power window regulator master switch operated

      OFF: Rear power window switch RH on power window regulator master switch not operated

      -

      RL Door P/W Down SW*

      Rear power window LH remote manual down signal / ON or OFF

      ON: Rear power window LH remote manual down switch on power window regulator master switch operated

      OFF: Rear power window switch LH on power window regulator master switch not operated

      -

      Window Lock Switch Status

      Power window lock switch / ON or OFF

      ON: Power window lock switch on

      OFF: Power window lock switch off

      -

      Number of Trouble Codes

      Number of trouble codes / Min.: 0, Max.: 255

      Number of DTCs displayed

      -

      • *: Rear Door Power Window

      Table 2. D-Door Motor

      Tester Display

      Measurement Item/Range

      Normal Condition

      Diagnostic Note

      D Door P/W Auto SW

      Driver side power window auto up/down signal / ON or OFF

      ON: Driver side power window auto up/down switch operated

      OFF: Driver side power window switch not operated

      -

      D Door P/W Up SW

      Driver side power window manual up signal / ON or OFF

      ON: Driver side power window manual up switch operated

      OFF: Driver side power window switch not operated

      -

      D Door P/W Down SW

      Driver side power window manual down signal / ON or OFF

      ON: Driver side power window manual down switch operated

      OFF: Driver side power window switch not operated

      -

      Glass Position (Close-1/4)

      Jam protection status of window glass within range of fully closed to 1/4 open position / OK or Caution

      OK: Motor operates normally between fully closed to 1/4 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (1/4-2/4)

      Jam protection status of window glass within range of 1/4 to 1/2 open position / OK or Caution

      OK: Motor operates normally between 1/4 to 1/2 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (2/4-3/4)

      Jam protection status of window glass within range of 1/2 to 3/4 open position / OK or Caution

      OK: Motor operates normally between 1/2 to 3/4 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (3/4-Open)

      Jam protection status of window glass within range of 3/4 to fully open position / OK or Caution

      OK: Motor operates normally between 3/4 to fully open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Number of Trouble Codes

      Number of trouble codes / Min.: 0, Max.: 255

      Number of DTCs displayed

      -
      Table 3. P-Door Motor

      Tester Display

      Measurement Item/Range

      Normal Condition

      Diagnostic Note

      P Door P/W Auto SW

      Front passenger side power window auto up/down signal / ON or OFF

      ON: Front passenger side power window auto up/down switch operated

      OFF: Front passenger side power window regulator switch not operated

      -

      P Door P/W Up SW

      Front passenger side power window manual up signal / ON or OFF

      ON: Front passenger side power window manual up switch operated

      OFF: Front passenger side power window regulator switch not operated

      -

      P Door P/W Down SW

      Front passenger side power window manual down signal / ON or OFF

      ON: Front passenger side power window manual down switch operated

      OFF: Front passenger side power window regulator switch not operated

      -

      Glass Position (Close-1/4)

      Jam protection status of window glass within range of fully closed to 1/4 open position / OK or Caution

      OK: Motor operates normally between fully closed to 1/4 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (1/4-2/4)

      Jam protection status of window glass within range of 1/4 to 1/2 open position / OK or Caution

      OK: Motor operates normally between 1/4 to 1/2 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (2/4-3/4)

      Jam protection status of window glass within range of 1/2 to 3/4 open position / OK or Caution

      OK: Motor operates normally between 1/2 to 3/4 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (3/4-Open)

      Jam protection status of window glass within range of 3/4 to fully open position / OK or Caution

      OK: Motor operates normally between 3/4 to fully open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Number of Trouble Codes

      Number of trouble codes / Min.: 0, Max.: 255

      Number of DTCs displayed

      -
      Table 4. RL-Door Motor (w/ Rear Door Power Window)

      Tester Display

      Measurement Item/Range

      Normal Condition

      Diagnostic Note

      RL Door P/W Auto SW

      Rear power window LH auto up/down signal / ON or OFF

      ON: Rear power window LH auto up/down switch operated

      OFF: Rear power window LH switch not operated

      -

      RL Door P/W Up SW

      Rear power window LH manual up signal / ON or OFF

      ON: Rear power window LH manual up switch operated

      OFF: Rear power window LH switch not operated

      -

      RL Door P/W Down SW

      Rear power window LH manual down signal / ON or OFF

      ON: Rear power window LH manual down switch operated

      OFF: Rear power window LH switch not operated

      -

      Glass Position (Close-1/4)

      Jam protection status of window glass within range of fully closed to 1/4 open position / OK or Caution

      OK: Motor operates normally between fully closed to 1/4 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (1/4-2/4)

      Jam protection status of window glass within range of 1/4 to 1/2 open position / OK or Caution

      OK: Motor operates normally between 1/4 to 1/2 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (2/4-3/4)

      Jam protection status of window glass within range of 1/2 to 3/4 open position / OK or Caution

      OK: Motor operates normally between 1/2 to 3/4 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (3/4-Open)

      Jam protection status of window glass within range of 3/4 to fully open position / OK or Caution

      OK: Motor operates normally between 3/4 to fully open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Number of Trouble Codes

      Number of trouble codes / Min.: 0, Max.: 255

      Number of DTCs displayed

      -
      Table 5. RR-Door Motor (w/ Rear Door Power Window)

      Tester Display

      Measurement Item/Range

      Normal Condition

      Diagnostic Note

      RR Door P/W Auto SW

      Rear power window RH auto up/down signal / ON or OFF

      ON: Rear power window RH auto up/down switch operated

      OFF: Rear power window RH switch not operated

      -

      RR Door P/W Up SW

      Rear power window RH manual up signal / ON or OFF

      ON: Rear power window RH manual up switch operated

      OFF: Rear power window RH switch not operated

      -

      RR Door P/W Down SW

      Rear power window RH manual down signal / ON or OFF

      ON: Rear power window RH manual down switch operated

      OFF: Rear power window RH switch not operated

      -

      Glass Position (Close-1/4)

      Jam protection status of window glass within range of fully closed to 1/4 open position / OK or Caution

      OK: Motor operates normally between fully closed to 1/4 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (1/4-2/4)

      Jam protection status of window glass within range of 1/4 to 1/2 open position / OK or Caution

      OK: Motor operates normally between 1/4 to 1/2 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (2/4-3/4)

      Jam protection status of window glass within range of 1/2 to 3/4 open position / OK or Caution

      OK: Motor operates normally between 1/2 to 3/4 open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Glass Position (3/4-Open)

      Jam protection status of window glass within range of 3/4 to fully open position / OK or Caution

      OK: Motor operates normally between 3/4 to fully open position

      Caution: Jam protection function operates due to detection of foreign object or irregular movement

      -

      Number of Trouble Codes

      Number of trouble codes / Min.: 0, Max.: 255

      Number of DTCs displayed

      -
      Table 6. Main Body

      Tester Display

      Measurement Item/Range

      Normal Condition

      Diagnostic Note

      Communication D-Door Motor

      Connection status between door window regulator motor (for driver side) and main body ECU (instrument panel junction block) / OK or Stop

      OK: Connection

      Stop: No connection

      -

      Communication P-Door Motor

      Connection status between door window regulator motor (for front passenger side) and main body ECU (instrument panel junction block) / OK or Stop

      OK: Connection

      Stop: No connection

      -

      Communication RR-Door Motor*

      Connection status between rear door window regulator motor LH and main body ECU (instrument panel junction block) / OK or Stop

      OK: Connection

      Stop: No connection

      -

      Communication RL-Door Motor*

      Connection status between rear door window regulator motor RH and main body ECU (instrument panel junction block) / OK or Stop

      OK: Connection

      Stop: No connection

      -

      Communication Master SW

      Connection status between master switch and main body ECU (instrument panel junction block) / OK or Stop

      OK: Connection

      Stop: No connection

      -

      D Door Courtesy SW

      Driver side door courtesy light switch signal / ON or OFF

      ON: Driver side door opened

      OFF: Driver side door closed

      -

      P Door Courtesy SW

      Front passenger side door courtesy light switch signal / ON or OFF

      ON: Front passenger side door opened

      OFF: Front passenger side door closed

      -

      • *: w/ Rear Door Power Window

  2. PERFORM ACTIVE TEST

    Tip:

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / (desired system) / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      CAUTION:

      Be careful to avoid injuries as this test causes vehicle parts to move. During the Active Test, the jam protection function does not operate.

      Table 7. D-Door Motor

      Tester Display

      Test Part

      Control Range

      Diagnostic Note

      Power Window

      Driver side power window

      OFF/UP/DOWN

      -
      Table 8. P-Door Motor

      Tester Display

      Test Part

      Control Range

      Diagnostic Note

      Power Window

      Front passenger side power window

      OFF/UP/DOWN

      -
      Table 9. RL-Door Motor (w/ Rear Door Power Window)

      Tester Display

      Test Part

      Control Range

      Diagnostic Note

      Power Window

      Rear LH side power window

      OFF/UP/DOWN

      -
      Table 10. RR-Door Motor (w/ Rear Door Power Window)

      Tester Display

      Test Part

      Control Range

      Diagnostic Note

      Power Window

      Rear RH side power window

      OFF/UP/DOWN

      -