VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1300

DTC Code DTC Name
C1300 Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU (brake actuator assembly) stores this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.

DTC No.

DTC Detection Condition

Trouble Area

C1300

Internal failure of the skid control ECU.

Skid control ECU (Brake actuator assembly)

PROCEDURE

  1. REPLACE BRAKE ACTUATOR ASSEMBLY

    1. Replace the skid control ECU (brake actuator assembly) (Click here).

      Tip:

      This DTC is stored when the skid control ECU (brake actuator assembly) detects a malfunction in an internal circuit.

    2. Perform system variant learning and acceleration sensor zero point calibration (Click here).

    3. Perform the sensor check using the Test Mode procedure (Click here).

    END